Product Overview
Plant Support Systems provide engineered, non-penetrating and floor-mounted structural support frameworks for industrial piping, cable trays, and mechanical units. Built from structural-grade carbon steel or stainless steel paired with high-density polyurethane bases, these systems distribute point loads evenly across industrial roofs and concrete plant floors.
Engineered for modular assembly, the system utilizes slotted channels and proprietary clamping hardware that eliminate on-site welding, reduce installation labor hours, and prevent roof membrane compromise. Each assembly undergoes rigorous load verification to withstand severe thermal expansion, seismic shifts, and corrosive chemical environments.
-
FRP Tree Support Stakes(FRP stands for Fiberglass Reinforced Plastics, a lightweight and high-strength composite material.)view more
Stable Tree Root Protection FRP Tree Support Stakes (Wind-resistant, Long-lasting Protection for Forests) -
FRP Tomato StakesLoad - bearing and Anti - sagging FRP Tomato Stakes (Directional Vine - guiding for Quality Improvement and Yield Increase)view more
-
Fiberglass Cucumber Trellis PostsDesigned for climbing cucumbers, gourds and beans, these FRP posts solve vine tangling, ground fruit rot and low space utilization. Their flexible, grooved design supports natural twining and 3D trellis systems. They are lighter and...view more
-
Fiberglass Eggplant StakesEggplants bear heavy fruits and often lodge or lean. These FRP eggplant stakes feature a high-strength load-bearing structure to stabilize plants, improve light exposure and ensure even skin coloring. They fit potted, backyard and...view more
-
FRP Bean StakesThese supports are specially customized for bean crops and made of FRP material! They can effectively solve problems such as bean vine entanglement and seedling lodging. The "Flexible and Gentle" design makes them suitable for various...view more
-
Vine Crops StakesThese FRP vine stakes are designed for grapes, tomatoes, cucumbers and beans. They replace perishable bamboo and rust-prone metal, offering flexible support that sways with wind to avoid breaking. Corrosion-resistant to pesticides and...view more
-
Fiberglass Vineyard StakesDeveloped for large vineyards (flat, mountain and slope), these FRP stakes deliver deep-soil stability and layered guidance for grapevines. They improve ventilation, light and fruit coloring, replace cement and metal poles, and lower...view more
-
Fiberglass Nursery StakesThese slim FRP stakes are made for greenhouse and nursery seedlings (vegetables, flowers, saplings). They protect fragile stems, keep seedlings upright, improve light absorption and survival rate, and avoid scratches and damages caused...view more
-
Fiberglass Garden Training StakesThis FRP vine training stake is designed for courtyard and balcony climbing plants. It focuses on directional growth control and 3D landscape shaping, solving messy vine entanglement and unattractive growth. With good flexibility and...view more
-
Fiberglass Pea Seedling Support StakesSpecially made for pea seedlings (2–6 leaf stage), these FRP stakes provide soft, stable support and early vine guidance. They prevent lodging, protect tender stems, promote early climbing and help peas enter fast growth earlier.view more
-
Fiberglass Marker StakesThis FRP marker stake is specially developed for **largescale agricultural management**. It is used for plot division, crop identification, boundary warning and area positioning. It has excellent weather resistance and wind resistance,...view more
-
Fiberglass Reflective StakesThese reflective stakes made of FRP are specially customized for safety signs in nighttime or low-light environments! They primarily address the nighttime warning needs of outdoor areas. The high-brightness reflective design ensures...view more
Technical Specifications
|
Parameter |
Specification Detail |
|
Material Options |
Carbon Steel (ASTM A36 / Q235B), Austenitic Stainless Steel (AISI 304 / 316) |
|
Surface Treatment |
Hot-Dip Galvanized (ASTM A123 / ISO 1461, min. 85 um), Electro-Galvanized, Powder Coated |
|
Base Material |
UV-Stabilized Polyurethane (PU) or Injection-Molded Polypropylene with Anti-Vibration Pads |
|
Standard Load Capacity |
Up to 15 kN (Static Point Load per Base; custom heavy-duty configurations available) |
|
Operating Temperature |
-40°C to +120°C |
|
Channel Profile Size |
41x41 mm, 41x62 mm, 41x82 mm (Thickness: 2.0 mm, 2.5 mm, 3.0 mm) |
|
Fastener Hardware |
Grade 8.8 / A2-70 / A4-70 Bolts with Serrated Channel Nuts |
|
Compliance & Standards |
ISO 9001, CE, ASTM Standards, ASCE 7 Wind Load Compliant |

Non-Penetrating Load Distribution: Freestanding bases spread equipment weight evenly, eliminating roof membrane punctures and preventing costly water ingress.
Modular Bolt-Together Assembly: Slotted strut channels and pre-engineered fittings allow rapid on-site adjustment using standard hand tools, requiring zero hot-work permits or welding.
Superior Corrosion Resistance: Hot-dip galvanizing applied post-fabrication ensures complete edge and weld protection against salt spray, chemical washdowns, and industrial atmospheric pollution.
Dynamic Vibration Isolation: Integrated elastomeric pads absorb equipment harmonic vibrations, mitigating fatigue stress on connected pipes and ductwork.
High Load-to-Weight Ratio: Cold-rolled steel profiles deliver high torsional rigidity while minimizing dead weight on existing structural steel or roof decks.
Rooftop MEP Routing: Elevating and supporting chilled water pipes, gas lines, and electrical cable trays on commercial and industrial roofs without breaching waterproofing layers.
Chemical Processing Plants: Securing corrosive fluid transport pipelines using acid-resistant 316 stainless steel assemblies.
Data Centers & HVAC Yards: Mounting heavy air handling units, chillers, and generator exhaust runs with precise alignment control.
Automotive Assembly Lines: Constructing overhead or floor-mounted utility gantries and pneumatic line supports that endure constant mechanical vibration.

OEM/ODM Services

Custom Engineering & FEA
In-house structural engineers utilize Finite Element Analysis (FEA) to validate custom support frames against specific site wind loads, seismic zones, and dead/live load requirements.
Dimensional Customization
Custom channel lengths, punched hole patterns, bespoke base footprints, and specialized bracket geometries manufactured per CAD drawings.


Material & Finish Tailoring
Selection of specific metal grades (Aluminum, Duplex Stainless Steel) and specialized fluoropolymer or epoxy coatings for extreme chemical exposure.
Private Labeling & Kitting
Custom laser-etched part numbers, barcoded packaging, and pre-sorted project kitting to streamline job-site staging.

Quality Control
Raw Material Traceability
Mill Test Certificates (MTC) verified for every batch of steel to ensure chemical composition compliance (carbon, manganese, sulfur limits).
Galvanizing Thickness Testing
Magnetic and electromagnetic coating thickness gauges used per ISO 2178 to verify zinc layer uniformity and adhesion.
Load Testing Verification
Random samples tested on hydraulic tensile/compressive test benches to verify ultimate failure thresholds and deflection limits under rated loads.
Dimensional Inspection
CMM (Coordinate Measuring Machine) and digital caliper checks performed on critical hole centers, slot tolerances, and profile straightness.
Packaging & Shipping
Export-Grade Palletization
Steel profiles bundled with heavy-duty steel strapping and wrapped in anti-corrosion VCI (Volatile Corrosion Inhibitor) film for ocean freight.
Modular Stackable Crates
Base blocks and delicate hardware packed in reinforced plywood crates to prevent transit abrasion and shifting.
Logistics Support
Container loading optimization (20GP / 40HQ) with fumigation-free wooden pallets meeting ISPM 15 standards. Complete shipping documentation (Commercial Invoice, Packing List, Certificate of Origin, MTC) provided prior to dispatch.

Direct Manufacturing Infrastructure: Operating a 35,000 m2 production facility equipped with high-speed roll-forming lines, robotic welding cells, and automated hot-dip galvanizing lines.
Engineering Support Partnership: Direct access to application engineers who review piping layouts, calculate point load distributions, and provide certified stamped drawings.
Strict Compliance Standards: Full adherence to ISO 9001 quality management systems and international material testing standards.
Reliable Lead Times: Optimized raw material inventory and streamlined production scheduling ensure stable delivery schedules for bulk project orders.
Frequently Asked Questions

Request a Quote
To receive a formal quotation, project load review, or sample kit, provide your project specifications and engineering drawings below:
Required Application: (E.g., Rooftop Pipe Support, Cable Tray Bridge, Heavy Equipment Mount)
Loading Requirements: (Estimated static/dynamic load per point)
Material & Finish Preference: (Hot-Dip Galvanized, Stainless Steel 304/316)
Estimated Quantity / Project Timeline:
As one of the most professional plant support systems manufacturers and suppliers in China, we're featured by quality products and good service. Please rest assured to wholesale bulk slip-resistant plant support systems for sale here from our factory. Contact us for pricelist.
